Table of Contents
Advertisement
32.Trunk Room Light
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Turn the trunk room light to the left for 60° to re-
move it and disconnect the harness connector.
3) Remove the bulb (A).
(A)
B: INSTALLATION
Install in the reverse order of removal.
Trunk Room Light
C: INSPECTION
1. TRUNK ROOM LIGHT BULB
1) Visually check the bulb for blow out.
2) Check the bulb specification. <Ref. to LI-2,
SPECIFICATION, General Description.>
3) If NG, replace the bulb with a new one.
2. TRUNK LID SWITCH (TRUNK ROOM
LIGHT SWITCH)
Measure the resistance between trunk lid switch
terminals.
LI-00321
Trunk lid position
LI-00286
LI-37
Terminal No.
Close
1 and 3
Open
LIGHTING SYSTEM
3
2
1
LI-00290
Standard
More than 1 MΩ
1.5±0.5 Ω
Advertisement
Chapters
Table of Contents
