Subaru Legacy 2005 Service Manual page 4018

EXTERIOR/INTERIOR TRIM
28.Assist Grip
A: REMOVAL
1) Remove the screw cover, and remove the screw
inside.
2) Pull the left side of assist grip toward you, and ro-
tate the right side of it counterclockwise to remove.
3) Remove the roof trim. <Ref. to EI-67, REMOV-
AL, Roof Trim.>
4) Remove the bolts, and remove the assist grip
bracket.
(A)
(A) Grommet
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
⋅
7.5 N m (0.77 kgf-m, 5.53 ft-lb)
CAUTION:
Be sure to install the grommet to assist grip
bracket.
When the assist grip is installed with no grom-
met, it may cause the faulty returning.
Assist Grip
EI-00809
EI-01065
EI-66