Table of Contents
Advertisement
C: DTC 15 DRIVER'S AIRBAG FAILURE
DTC DETECTING CONDITION:
• Airbag main harness (Driver's side) circuit is shorted to power supply.
• Airbag module harness (Driver's side) circuit is shorted to power supply.
• Roll connector is shorted to power supply.
• Driver's airbag module is faulty.
• Airbag control module is faulty.
CAUTION:
• Before diagnosing the airbag system, be sure to turn the ignition switch OFF, disconnect the
ground cable from battery, and wait more than 20 seconds before starting to work.
• When replacing the airbag module, seat belt pretensioner, roll connector, control module and sen-
sor, reconnect each part and check that the warning light operates properly.
• When inspecting the airbag main harness, disconnect the airbag module connector of the driver's
and passenger's seats for safety reasons.
WIRING DIAGRAM:
AB2
1 2 3 4
1 2 3
7 8 9 10 11 12 13 14 15 16 17
18 19 20 21 22 23 24 25 26 27 28
Diagnostic Chart with Trouble Code
AB6
AIRBAG CONTROL MODULE
AB37
AIRBAG MODULE
(DRIVER SIDE)
AB6
AB38
1
2
4 5 6
AB(diag)-47
AIRBAG SYSTEM (DIAGNOSTICS)
AB2
AB7
STEERING
ROLL CONNECTOR
AB38
AB37
1
2
AB-01256
Advertisement
Chapters
Table of Contents
