Table of Contents
Advertisement
AIRBAG SYSTEM (DIAGNOSTICS)
• The removed front seat with an airbag module
must be kept at least 200 mm (8 in) away from walls
and other objects.
(1) 200 mm (8 in) or more
• When painting or repairing work for sheet metal
on the front part of the vehicle including the front
wheel apron, front fender and front side frame, re-
move the front sub sensors, curtain airbag sensor
and wire harness of the airbag system.
• When painting or performing sheet metal work
on the side of the vehicle, including the side sill,
center pillar and front and rear doors, remove the
side airbag sensors and wire harness of the airbag
system.
• Do not discard undeployed airbag module. They
could cause a serious accident if accidentally de-
ployed.
General Description
(1)
AB-00128
AB-00129
AB(diag)-6
Advertisement
Chapters
Table of Contents
