Subaru Legacy 2005 Service Manual page 4133

2. Check List for Interview
A: CHECK
Inspect the following items about the vehicle's state.
1. DISPLAY OF COMMUNICATION ERROR
Communication error is
displayed in odo/trip meter.
Ignition key position
Timing
2. DISPLAY IN COMBINATION METER
Display in combination
meter
Center display
Display of other indicators
Check List for Interview
When and how often are they displayed?
❏ Always
❏ Sometimes
❏ Only once
Which communication error is displayed? (Record them all)
❏ Er IU (Fail in the body integrated module)
❏ Er HC (Fail of high-speed CAN)
❏ Er LC (Fail of low-speed CAN)
❏ Er −− (Fails of both high-speed and low-speed CAN)
❏ Er EG (Fail of EGI communication counter)
❏ Er TC (Fail of TCM communication counter)
❏ Er Ab (Fail of vehicle dynamics control (VDC)/ABS communication counter)
❏ OFF
❏ ACC
❏ ON (before starting engine)
❏ START
❏ ON (after engine starting, engine is running)
❏ ON (after engine starting, engine is at a standstill)
❏ Immediately after turning the ignition to ON
❏ Immediately after turning the ignition to START
a) Display of engine coolant temperature gauge
b) Display of fuel gauge
c) Display of ambient temperature
d) Malfunction indicator light
e) SPORT indicator light (AT warning light)
f) ABS warning light/Vehicle dynamics control (VDC) warning
light
g) Immobilizer indicator light
h) Seat belt warning light (Driver's seat)
i) Seat belt warning light (Passenger's seat)
LAN(diag)-3
LAN SYSTEM (DIAGNOSTICS)
❏ OK / ❏ NG
❏ OK / ❏ NG
❏ OK / ❏ NG
❏ ON / ❏ OFF
❏ ON / ❏ OFF
❏ ON / ❏ OFF
❏ ON / ❏ Blink / ❏ OFF
❏ ON / ❏ OFF
❏ ON / ❏ OFF