Subaru Legacy 2005 Service Manual page 3599

3. DRIVER'S AIRBAG (BETWEEN AIRBAG
MAIN HARNESS AND ROLL CONNECTOR)
AND PASSENGER'S AIRBAG
1) How to disconnect:
(1) Push the slide lock (A) into the direction of
arrow.
(A)
(2) With the slide lock pushed, disconnect the
connector.
CAUTION:
When pulling the slide lock or disconnecting
the connector, be sure to hold the connector,
not the harness.
2) How to connect:
Holding the connector, push it in securely until a
connecting sound is heard.
CAUTION:
Be sure to insert the connector in until it is
locked. Pull it gently to make sure that it is
locked securely.
Airbag Connector
4. SIDE AIRBAG AND CURTAIN AIRBAG
1) How to disconnect:
(1) Push the lock arm (A).
(2) With the lock arm (A) pushed in, move the
slide lock (B) in the direction of arrow.
AB-00722
(3) With the slide lock moved, release the lock
arm (back to the original position), and discon-
nect the connector.
CAUTION:
When pulling the slide lock or disconnecting
the connector, be sure to hold the connector,
not the harness.
AB-00022
AB-00023
AB(diag)-27
AIRBAG SYSTEM (DIAGNOSTICS)
(B)
(A)
AB-00017
AB-00018