Table of Contents
Advertisement
7) Remove the clips, and remove the radiator
guide.
8) Remove the bolts and clips, and remove the
bumper lower center bracket.
B: INSTALLATION
1. FRONT BUMPER FACE
1) Install in the reverse order of removal.
2) Fit the slider (A) to the guide plate (B) securely.
(A)
2. FRONT BUMPER BEAM ASSEMBLY
Install in the reverse order of removal.
Tightening torque:
Refer to "COMPONENT" of "General Descrip-
tion". <Ref. to EI-5, FRONT BUMPER, COM-
PONENT, General Description.>
Front Bumper
EI-00801
EI-00578
(B)
EI-00571
EI-31
EXTERIOR/INTERIOR TRIM
Advertisement
Chapters
Table of Contents
