35.Trunk Lid Garnish
A: REMOVAL
1) Remove the license plate, and loosen the bolts
(A).
(A)
2) Remove the clip in the upper corner of trunk lid
garnish.
3) Remove the trunk lid garnish in the order from
the end of it, by accessing it through the gap be-
tween trunk lid garnish and trunk lid panel.
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
⋅
7.5 N
m (0.77 kgf-m, 5.53 ft-lb)
Trunk Lid Garnish
EI-00568
EI-01031
EI-01032
EI-75
EXTERIOR/INTERIOR TRIM