13.Rear Gate Latch Assembly
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the rear gate trim. <Ref. to EI-69, RE-
MOVAL, Rear Gate Trim.>
3) Remove the two screws.
4) Remove the rear gate latch cover. (Model with
double lock)
(2)
(1)
(1) Clip
(2) Claw
(3) Hook
Rear Gate Latch Assembly
5) Disconnect the each connector and rear gate
handle cable.
SL-00240
(3)
6) Remove the rear gate latch assembly.
B: INSTALLATION
SL-00286
Install in the reverse order of removal.
NOTE:
Make sure the lock works correctly after installa-
tion.
SL-35
SECURITY AND LOCKS
(1)
(2)
(1) Cable
(2) Rear gate lock actuator connector
(3) Rear gate latch switch connector
(2)
(3)
SL-00301