Rear Turn Signal Light Bulb - Subaru Legacy 2005 Service Manual

22.Rear Turn Signal Light Bulb

A: REMOVAL
1. SEDAN MODEL
1) Remove the trunk side trim cover.
2) Turn the socket and remove the bulb.
2. WAGON MODEL
1) Remove the rear combination light assembly.
<Ref. to LI-25, WAGON MODEL, REMOVAL, Rear
Combination Light Assembly.>
2) Turn the socket and remove the bulb.
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
1) Visually check the bulb for blow out.
2) Check the bulb specification. <Ref. to LI-2,
SPECIFICATION, General Description.>
3) If NG, replace the bulb with a new one.
Rear Turn Signal Light Bulb
LI-00299
LI-00300
LI-27
LIGHTING SYSTEM