Table of Contents
Advertisement
Diagnostic Chart with Trouble Code
AIRBAG SYSTEM (DIAGNOSTICS)
13.Diagnostic Chart with Trouble Code
A: DTC 11 DRIVER'S AIRBAG FAILURE
DTC DETECTING CONDITION:
• Airbag main harness circuit is open, shorted or shorted to ground.
• Airbag module harness (Driver's side) circuit is open, shorted or shorted to ground.
• Roll connector circuit is open, shorted or shorted to ground.
• Driver's airbag module is faulty.
• Airbag control module is faulty.
CAUTION:
• Before diagnosing the airbag system, be sure to turn the ignition switch OFF, disconnect the
ground cable from battery, and wait more than 20 seconds before starting to work.
• When replacing the airbag module, seat belt pretensioner, roll connector, control module and sen-
sor, reconnect each part and check that the warning light operates properly.
• When inspecting the airbag main harness, disconnect the airbag module connector of the driver's
and passenger's seats for safety reasons.
NOTE:
Prior to starting work, prepare two airbag registers (98299PA040).
AB(diag)-42
Advertisement
Chapters
Table of Contents
