Front Hood - Subaru Legacy 2005 Service Manual

EXTERIOR BODY PANELS
4. FRONT HOOD STRIKER
1) Open the hood.
2) Remove the bolt, and remove the front hood
striker.
5. FRONT HOOD PANEL
1) Open the front hood to remove the window
washer hose.
2) Remove the front hood insulator.
<Ref. to EB-13, FRONT HOOD INSULATOR, RE-
MOVAL, Front Hood.>
3) Remove the front hood weather strip.
<Ref. to EB-13, FRONT HOOD WEATHER STRIP,
REMOVAL, Front Hood.>
4) Remove the front hood striker.
<Ref. to EB-14, FRONT HOOD STRIKER, RE-
MOVAL, Front Hood.>
5) Remove the front hood duct. (Turbo model)
<Ref. to EI-25, REMOVAL, Front Hood Grille.>
6) Remove the window washer hose and nozzle.
<Ref. to WW-20, REMOVAL, Front Washer Noz-
zle.>

Front Hood

7) Remove the bolts, and remove the front hood
panel from front hood hinge.
B: INSTALLATION
EB-00144
1. FRONT HOOD INSULATOR
Install in the reverse order of removal.
NOTE:
Be careful not to catch the window washer hose in.
2. FRONT HOOD WEATHER STRIP
Install in the reverse order of removal.
3. FRONT HOOD HINGE
Install in the reverse order of removal.
Tightening torque:
24.5 N
4. FRONT HOOD STRIKER
EB-00137
Install in the reverse order of removal.
Tightening torque:
33.0 N
5. FRONT HOOD PANEL
Install in the reverse order of removal.
Tightening torque:
24.5 N
EB-14
⋅
m (2.5 kgf-m, 18.1 ft-lb)
⋅
m (3.4 kgf-m, 24.5 ft-lb)
⋅
m (2.5 kgf-m, 18.1 ft-lb)
EB-00138