Subaru Legacy 2005 Service Manual page 3800

COMMUNICATION SYSTEM
3. Horn
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the two clips and turn up the lower mud
guard RH.
3) Remove the horn bracket mounting bolt (A).
4) Disconnect the harness connector and remove
the horn assembly (B).
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
With 12 V direct current supplied between horn ter-
minals, check that the horn sounds properly.
LI-00288
(A)
(B)
COM00016
COM00020
Horn
COM-4