Table of Contents
Advertisement
Rear Gate Outer Handle
SECURITY AND LOCKS
12.Rear Gate Outer Handle
A: REMOVAL
1) Remove the rear gate trim. <Ref. to EI-69, RE-
MOVAL, Rear Gate Trim.>
2) Remove the rear gate garnish. <Ref. to EI-76,
REMOVAL, Rear Gate Garnish.>
3) Remove the two nuts to take out the rear gate
outer handle.
4) Remove the cable of rear gate handle.
(1)
SL-00239
(1) Cable
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
Make sure the outer handle works correctly after in-
stallation.
C: INSPECTION
1) Check the cable of rear gate handle for deforma-
tion.
2) Check the rear gate outer handle and cable of
rear gate handle for smooth operation.
SL-34
Advertisement
Chapters
Table of Contents
