Table of Contents
Advertisement
10.FUNCTION CHECK
In order to check the body integrated module func-
tion, inspect the body integrated module and actu-
ator using Subaru Select Monitor without operating
switches.
1) On the "Main Menu" display screen, select the
{Each System Check} and press the [YES] key.
2) On the "System Selection Menu" display screen,
select the {Integ. unit mode} and press the [YES]
key.
3) On the "Integ. unit mode failure diag" display
screen, select the {System Operation Check Mode}
and press the [YES] key.
4) Select the item to be operated on the "System
Operation Check Mode" display screen with "UP/
Down key", and press the [YES] key.
Function check
Heater cock valve output
lock actuat, LOCK output
All seat UNLOCK, output
Double lock Solenoid
Shift Lock Solenoid
key locking output
Horn output
5) Pressing [YES] starts, [NO] cancels the opera-
tion and [YES] returns to the System Operation
Check Mode display screen.
NOTE:
If not equipped (based on area or condition), pro-
cess will not go on.
Subaru Select Monitor
LAN00018
LAN(diag)-23
LAN SYSTEM (DIAGNOSTICS)
Advertisement
Chapters
Table of Contents
