Table of Contents
Advertisement
Front Sealing Cover
EXTERIOR BODY PANELS
5. Front Sealing Cover
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the front door trim. <Ref. to EI-48, RE-
MOVAL, Door Trim.>
3) Remove the front speaker. <Ref. to ET-6, RE-
MOVAL, Front Speaker.>
4) Pull back the sealing cover.
NOTE:
• Carefully remove the butyl tape. Excessive force
will easily break the cover.
• If cover gets broken, replace it with a new one.
EB-00018
B: INSTALLATION
1) Install in the reverse order of removal.
2) When replacing the sealing cover, use the butyl
tape.
3) Press the butyl tape-applied area firmly to pre-
vent any floating on surface.
Butyl tape:
3M8626 or equivalent
NOTE:
• Apply a uniform bead of butyl tape.
• Attach the sealing cover, keeping it from becom-
ing wrinkled.
• Breaks in the bead will allow water leakage and
contamination.
C: INSPECTION
If the sealing cover gets damaged, replace it with a
new one.
EB-20
Advertisement
Chapters
Table of Contents
