EXTERIOR/INTERIOR TRIM
11.Roof Spoiler
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the rear gate trim. <Ref. to EI-69, RE-
MOVAL, Rear Gate Trim.>
3) Disconnect the connector of high-mounted stop
light and the washer hose of rear washer.
4) Remove the nuts and plastic caps.
5) Remove the clips, and remove the roof spoiler.
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
⋅
4.5 N
m (0.46 kgf-m, 3.32 ft-lb)
Roof Spoiler
EI-00828
EI-00646
EI-40