Subaru Legacy 2005 Service Manual page 3826

Hide thumbs Also See for Legacy 2005:

Table of Contents

GLASS/WINDOWS/MIRRORS

11.Rear Door Glass

1) Remove the rear door trim. <Ref. to EI-48, RE-

MOVAL, Door Trim.>

2) Remove the sealing cover. <Ref. to EB-24, RE-

MOVAL, Rear Sealing Cover.>

3) Remove the stabilizer.

4) Remove the clips (A), and remove the front end

and rear end of weather strip.

5) Remove the two screws to remove weather strip

Rear Door Glass

6) Operate the power window switch to move the

glass to the position shown in the figure, and then

remove the two nuts through service holes.

7) Remove the rear sash retaining nuts (A), and

move the rear sash (B) backward.

8) Remove the door glass.

• Since the gear may be disengaged, do not

turn regulator in the closing direction after re-

moving glass.

• Avoid impact and damage to the glass.

B: INSTALLATION

1) Install in the reverse order of removal.

Make sure that the glass stay is placed securely

2) Adjust the rear door glass. <Ref. to GW-25, AD-

JUSTMENT, Rear Door Glass.>

Tightening torque:

Refer to "COMPONENT" of "General Descrip-

tion". <Ref. to GW-5, REAR DOOR GLASS,

COMPONENT, General Description.>

Chapters

Table of Contents