Subaru Legacy 2005 Service Manual page 4113

Read Diagnostic Trouble Code (DTC)
IMMOBILIZER (DIAGNOSTICS)
6. Read Diagnostic Trouble
Code (DTC)
A: OPERATION
1. ENGINE ECM
1) On the "Main Menu" display screen, select the
{Each System Check} and press the [YES] key.
2) On the "System Selection Menu" display screen,
select the {Engine Control System} and press the
[YES] key.
3) Press the [YES] key after the information of en-
gine type is displayed.
4) On the "Engine Diagnosis" display screen, select
the {Diagnostic Code(s) Display}, and then press
the [YES] key.
5) On the "Diagnostic Code(s) Display" display
screen, select the {Current Diagnostic Code(s)} or
{History Diagnostic Code(s)}, and then press the
[YES] key.
NOTE:
• For detailed operation procedure, refer to the
SUBARU SELECT MONITOR OPERATION MAN-
UAL.
• For detailed concerning DTC, refer to the List of
DTC. <Ref. to IM(diag)-15, LIST, List of Diagnostic
Trouble Code (DTC).>
2. BODY INTEGRATED MODULE
1) On the "Main Menu" display screen, select the
{Each System Check} and press the [YES] key.
2) On the "System Selection Menu" display screen,
select the {Integ. unit mode} and press the [YES]
key.
3) Press the [YES] key after the {Integ. unit mode}
is displayed.
4) On the "Integ. unit mode failure diag" display
screen, select the {Diagnostic Code(s) Display}
and press the [YES] key.
NOTE:
• For detailed operation procedure, refer to the
SUBARU SELECT MONITOR OPERATION MAN-
UAL.
• For detailed concerning DTC, refer to the List of
DTC. <Ref. to IM(diag)-15, LIST, List of Diagnostic
Trouble Code (DTC).>
IM(diag)-9