Table of Contents
Advertisement
AVENSIS REPAIR MANUAL (RM1018E)
LUBRICATION
–
OIL PUMP ASSY (1CD–FTV)
27.
REMOVE OIL LEVEL GAGE GUIDE
(a)
Remove the bolt which is used to secure the oil level gage
guide to the cylinder block.
(b)
Pull out the oil level gage guide together with the oil level
gage from the No. 1 oil pan.
(c)
Remove the O–ring from the oil level gage guide.
A79173
28.
REMOVE ENGINE OIL LEVEL SENSOR
(a)
Remove the 4 bolts and the level sensor.
NOTICE:
Be careful not to drop the oil level sensor when removing.
A79174
29.
REMOVE OIL PAN SUB–ASSY NO.2
(a)
Remove the 17 bolts and 2 nuts.
A56695
(b)
Insert the blade of SST between the No. 1 and No. 2 oil
pans, and cut off applied sealer and remove the No. 2 oil
pan.
SST
09032–00100
NOTICE:
Be careful not to damage the No. 1 and No. 2 oil pans.
A79175
30.
REMOVE OIL STRAINER SUB–ASSY
(a)
Remove the 2 bolts and 2 nuts, then remove the oil strain-
er and the gasket.
A56696
http://vnx.su
17–23
Advertisement
Table of Contents
