Table of Contents
Advertisement
14–94
A
A
AVENSIS REPAIR MANUAL (RM1018E)
ENGINE MECHANICAL
68.
INSTALL MANIFOLD STAY
(a)
Install the manifold stay with the 3 bolts.
Torque:
37 N m (377 kgf cm, 27 ft lbf) for Bolt A
49 N m (500 kgf cm, 36 ft lbf) for Bolt B
B
A76720
69.
INSTALL MANIFOLD STAY NO.2
(a)
Install the manifold stay with the 3 bolts.
Torque: 49 N m (500 kgf cm, 36 ft lbf)
70.
INSTALL EXHAUST PIPE ASSY FRONT
(See page
A76721
71.
INSTALL CAMSHAFT TIMING OIL CONTROL VALVE
ASSY
(a)
Apply a light coat of engine oil on a new O–ring, and install
it to the camshaft timing oil control valve.
(b)
Install the camshaft timing oil control valve with the bolt.
Torque: 9.0 N m (92 kgf cm, 80 in. lbf)
72.
INSTALL WATER BY–PASS PIPE NO.1
(a)
Install a new gasket and water by–pass pipe with the 2
nuts and 2 bolts.
B06777
Torque: 9.0 N m (92 kgf cm, 80 in. lbf)
73.
INSTALL OIL LEVEL GAGE GUIDE
(a)
Apply a light coat of engine oil on a new O–ring, and install
it to the oil level gage guide.
(b)
Install the oil level gage guide with the bolt.
Torque: 13 N m (133 kgf cm, 10 ft lbf)
A64026
74.
INSTALL INTAKE MANIFOLD
(a)
Install a new gasket to the intake manifold.
(b)
Install the intake manifold and the throttle body assembly
with the 2 brackets, 4 bolts and 2 nuts.
Torque: 30 N m (306 kgf cm, 22 ft lbf)
(c)
Connect the 2 vacuum hoses to the intake manifold.
(d)
Connect the 2 water hoses to the throttle body.
A79363
http://vnx.su
–
CYLINDER HEAD GASKET (1ZZ–FE/3ZZ–FE)
15–2)
Advertisement
Table of Contents
