51–14
Side Plate Front
Inscribed Mark
AVENSIS REPAIR MANUAL (RM1018E)
POWER STEERING
25.
(a)
C65369
(b)
C65368
(c)
NOTICE:
Make sure that the side plate front is installed facing in the
correct direction.
Housing
Sub–assy Front
F08482
26.
(a)
F08483
27.
(a)
C95038
http://vnx.su
–
VANE PUMP ASSY (AZ Series)
INSTALL VANE PUMP SIDE PLATE FRONT
Coat a new O–ring with power steering fluid and install it
into the housing sub–assy front.
Coat a new O–ring with power steering fluid and install it
onto the side plate front.
Align the dent of the side plate front with that of the hous-
ing sub–assy front, and install the side plate front.
INSTALL VANE PUMP CAM RING
Align the dent of the cam ring with that of the side plate
front, and install the cam ring with the inscribed mark fac-
ing upward.
INSTALL VANE PUMP ROTOR
Install the vane pump rotor.