AVENSIS REPAIR MANUAL (RM1018E)
ENGINE MECHANICAL
–
PARTIAL ENGINE ASSY (1ZZ–FE/3ZZ–FE)
73.
REMOVE WATER BY–PASS PIPE NO.1
(a)
Disconnect the knock sensor cramp.
(b)
Remove the 2 bolts and 2 nuts, then detach the water by–
pass pipe and the gasket.
A64027
74.
REMOVE WATER INLET
(a)
Remove the 2 nuts and the water inlet.
75.
REMOVE THERMOSTAT
76.
REMOVE ENGINE OIL PRESSURE SWITCH ASSY
(See page
A64028
77.
REMOVE CAMSHAFT POSITION SENSOR
(a)
Remove the bolt and the camshaft position sensor.
B00084
78.
REMOVE CRANKSHAFT POSITION SENSOR
(a)
Remove the 2 bolts and the crankshaft position sensor.
A76692
79.
REMOVE KNOCK SENSOR
(a)
Remove the nut and the knock sensor.
A64029
http://vnx.su
17–1)
14–35