Toyota Avensis ZZT251 2003 Service And Repair Manual page 592

A
A
A
B
B
B
A
A
Raise
Push
Hook
Pin
Push
AVENSIS REPAIR MANUAL (RM1018E)
ENGINE MECHANICAL
(c) Install the timing chain cover with the 11 bolts and nut.
Torque:
A
13 N m (133 kgf cm, 10 ft lbf) for A
19 N m (194 kgf cm, 14 ft lbf) for B
A
(d) Using a torx wrench socket (E8), install the stud bolt.
Torque: 9.5 N m (97 kgf cm, 84 in. lbf)
A
A
A65677
60. INSTALL CHAIN TENSIONER ASSY NO.1
(a) Check that the O–ring is clean, and set the hook as shown
in the illustration.
A62177
(b) Apply engine oil to the chain tensioner and install it with
the 2 nuts.
Torque: 9.0 N m (92 kgf cm, 80 in. lbf)
NOTICE:
If the hook released the plunger during installation, re–
hook the plunger by the hook to fix it.
A62178
61. INSTALL CRANKSHAFT POSITION SENSOR
(a) Apply a light coat of the engine oil to the O–ring on the
crankshaft position sensor.
(b) Install the crankshaft position sensor with the 2 bolts.
Torque: 9.0 N m (92 kgf cm, 80 in. lbf)
A76692
http://vnx.su
– CYLINDER HEAD GASKET (1ZZ–FE/3ZZ–FE)
14–91