Toyota Avensis ZZT251 2003 Service And Repair Manual page 1252

51–38
15. SEPARATE FRONT SUSPENSION ARM SUB–ASSY LOWER NO.1 LH
16. SEPARATE FRONT SUSPENSION ARM SUB–ASSY LOWER NO.1 RH
HINT:
Perform the same procedure on the other side.
17. REMOVE HOOD SUB–ASSY
18. REMOVE CYLINDER HEAD COVER SUB–ASSY
AZ Series:
No.2 Engine Hanger
No.1 Engine Hanger
No.1 Engine
Hanger UPR
1CD–FTV:
No.2 Engine Hanger
No.1 Engine Hanger
D25745
A79193
AVENSIS REPAIR MANUAL (RM1018E)
POWER STEERING – RACK & PINION POWER STEERING GEAR ASSY
19. SUSPEND ENGINE ASSEMBLY
(a) Install the 2 or 3 engine hangers with the bolts in the cor-
rect direction.
Parts No. :
No.1 Engine Hanger
No.1 Engine Hanger UPR
No.2 Engine Hanger
Bolt
Torque:
AZ Series:
38 N m (390 kgf cm, 28 ft lbf)
1CD–FTV:
37 N m (375 kgf cm, 27 ft lbf)
(b) Attach the engine chain hoist to the engine hangers.
CAUTION:
Do not attempt to hang the engine by hooking the chain to
D30389
any other parts.
20. REMOVE FRONT SUSPENSION CROSSMEMBER
SUB–ASSY
(a) Remove the 4 bolts and separate the center member.
D29969
(b) Remove the bolt and the 3 nuts, separate the engine
mounting insulator RR from the crossmember sub–assy.
(c) Using a transmission jack, support the crossmember
sub–assy.
C94595
http://vnx.su
(See page 30–6)
AZ Series: 1CD–FTV:
12281–28010 12281–27050
Yellow: 12284–27020
–
Black: 12284–27030
Yellow: 12282–27060
12282–28010
Black: 12282–27070
91512–61020 91642–81025