Table of Contents
Advertisement
14–82
14.
DISCONNECT FUEL TUBE SUB–ASSY
SST
09268–21010
15.
DISCONNECT UNION TO CONNECTOR TUBE HOSE
(a)
Disconnect the union to connector tube hose from the hose to hose tube.
16.
DISCONNECT RADIATOR HOSE INLET
(a)
Disconnect radiator hose inlet from the cylinder head.
17.
DISCONNECT HEATER INLET WATER HOSE
(a)
Disconnect the heater inlet water hose from the cylinder head.
AVENSIS REPAIR MANUAL (RM1018E)
ENGINE MECHANICAL
–
CYLINDER HEAD GASKET (1ZZ–FE/3ZZ–FE)
(See page
18.
REMOVE FAN AND GENERATOR V BELT
(a)
Turn the V–ribbed belt tensioner clockwise slowly and
loosen it. Remove the fan and generator V belt and put
back the V–ribbed belt tensioner carefully.
A60622
19.
REMOVE V–RIBBED IDLER ASSY NO.1
(a)
Remove the nut, bolt, tube and idler.
20.
REMOVE GENERATOR ASSY
A79324
21.
DISCONNECT IGNITION COIL ASSY
(a)
Remove the 5 clamps from the 5 clamp brackets.
(b)
Disconnect the 4 ignition coil connectors.
(c)
Remove the 2 nuts which are used to secure the engine
wire.
A76713
(d)
Remove the 4 bolts and the 4 ignition coils.
A64023
http://vnx.su
11–11)
(See page
19–7)
Advertisement
Table of Contents
