Table of Contents
Advertisement
32–44
18.
TEMPORARILY TIGHTEN FRONT DISC BRAKE BLEEDER PLUG
(a)
Temporarily install the front disc brake bleeder plug to the disc brake cylinder assy LH.
(b)
Install the bleeder plug cap to the bleeder plug.
19.
INSTALL PISTON SEAL
(a)
Apply lithium soap base glycol grease to a new piston seal.
(b)
Install the piston seal to the disc brake cylinder assy LH.
Cylinder Boot
Piston
Lithium soap base glycol grease
Piston
Cylinder Boot
Front Disc Brake Cylinder Mounting
Bush Dust Boot
Lithium soap base glycol grease
AVENSIS REPAIR MANUAL (RM1018E)
BRAKE
–
FRONT BRAKE
20.
INSTALL FRONT DISC BRAKE PISTON
(a)
Apply lithium soap base glycol grease to the front disc
brake piston and a new cylinder boot.
(b)
Install the cylinder boot to the front disc brake piston.
(c)
Install the piston to the disc brake cylinder assy LH.
NOTICE:
Do not install the piston forcibly in the disc brake cylinder.
G23226
21.
INSTALL CYLINDER BOOT
(a)
Using SST and a hammer, install the cylinder boot to the
disc brake cylinder assy LH.
SST
09550–60010
NOTICE:
Do not damage the cylinder boot.
HINT:
Install the boot securely to the disc brake cylinder assy LH.
G23225
22.
INSTALL FRONT DISC BRAKE CYLINDER MOUNTING
LH
(a)
Install the front disc brake cylinder mounting LH with the
2 bolts.
Torque: 102 N m (1,040 kgf cm, 75 ft lbf)
F45418
23.
INSTALL FRONT DISC BRAKE BUSH DUST BOOT
(a)
Apply lithium soap base glycol grease to the sealing sur-
face of 2 new front disc brake bush dust boots.
(b)
Install the 2 front disc brake bush dust boots to the front
disc brake cylinder mounting LH.
F45420
http://vnx.su
Advertisement
Table of Contents
