27–16
SST
C(-E)F
AVENSIS REPAIR MANUAL (RM1018E)
REAR SUSPENSION
–
REAR SUSPENSION ARM ASSY NO.1 LH
(b)
Remove the bolt, and remove the member side lower con-
trol arm assy LH.
G23871
(c)
Remove the clip and nut.
G23872
(d)
Using SST, remove the lower control arm assy LH from
the rear axle carrier sub–assy LH.
SST
NOTICE:
SST
Do not damage the dust cover.
G23873
6.
REMOVE REAR SUSPENSION ARM ASSY NO.1 LH
(a)
Remove the clip and nut.
G23880
(b)
Using SST, separate the rear axle carrier sub–assy LH
front side from the rear suspension arm assy No.1 LH.
SST
NOTICE:
Y
Do not damage the dust cover.
Y
Hang the upper control arm assy on the rear axle car-
rier sub–assy LH side with a wire substitute thing.
G23883
http://vnx.su
09610–20012
09628–62011