Table of Contents
Advertisement
SUPPLEMENTAL RESTRAINT SYSTEM
Battery
SST(s)
10 m (33 ft) or more
SST(s)
AVENSIS REPAIR MANUAL (RM1018E)
–
(6)
(7)
NOTICE:
Take care not to damage the SST(s) wire harness.
(8)
(c)
Deploy the airbag.
H40007
(1)
(2)
HINT:
The airbag is deployed as the LED of the SST(s) activation
switch comes on.
(d)
Dispose of the horn button assy.
CAUTION:
Y
The horn button assy is extremely hot when the air-
bag is deployed, so do not touch it for at least 30 min-
utes after deployment.
Y
When moving the vehicle which has the horn button
assy with the deployed airbag for scrapping, use
gloves and safety glasses.
Y
Use gloves and safety glasses when handling the
horn button assy with the deployed airbag.
Y
Always wash your hands with water after completing
the operation.
Y
Do not apply water, etc. to the horn button assy with
the deployed airbag.
HINT:
When scrapping a vehicle, deploy the airbag and scrap the ve-
hicle with the horn button assy still installed.
2.
DISPOSE OF HORN BUTTON ASSY (WHEN
DISPOSING OF AIRBAG ASSEMBLY DEPLOYMENT
Battery
METHOD)
NOTICE:
Y
When disposing of the horn button assy only, never
use the customer's vehicle to deploy the airbag.
Y
Be sure to follow the procedure detailed below when
deploying the airbag.
HINT:
H40005
Have a battery as the power source to deploy the airbag.
(a)
Check the function of the SST(s) (See step 1–(a)).
(b)
Remove the horn button assy
http://vnx.su
HORN BUTTON ASSY
Move the SST(s) at least 10 m (33 ft) away from the
front of the vehicle.
Close all the doors and windows in the vehicle.
Connect the red clip of the SST(s) to the battery
positive (+) terminal and the black clip of the SST(s)
to the negative (–) terminal.
Check that no one is inside the vehicle or within a
10 m (33 ft) radius of the vehicle.
Press the activation switch of the SST(s) and
deploy the airbag.
60–21
(See page
60–17).
Advertisement
Table of Contents
