Toyota Avensis ZZT251 2003 Service And Repair Manual page 928

17–16
29. REMOVE CRANKSHAFT PULLEY
SST 09213–54015 (91651–60855), 09330–00021, 09950–50013 (09951–05010, 09952–05010,
09953–05020, 09954–05021)
30. REMOVE CHAIN TENSIONER ASSY NO.1
31. REMOVE CRANKSHAFT POSITION SENSOR
33. REMOVE V–RIBBED BELT TENSIONER ASSY
34. REMOVE TIMING CHAIN OR BELT COVER SUB–ASSY
35. REMOVE CRANKSHAFT POSITION SENSOR PLATE NO.1
36. REMOVE CHAIN TENSIONER SLIPPER
37. REMOVE CHAIN VIBRATION DAMPER NO.1
38. REMOVE TIMING CHAIN GUIDE
39. REMOVE CHAIN SUB–ASSY
40. REMOVE CRANKSHAFT TIMING GEAR OR SPROCKET
41. REMOVE NO.2 CHAIN SUB–ASSY
43. INSTALL OIL PUMP ASSY
(a) Install a new gasket and oil pump with 3 bolts.
Torque: 19 N m (195 kgf cm, 15 ft lbf)
44. INSTALL NO.2 CHAIN SUB–ASSY
45. INSTALL CRANKSHAFT TIMING GEAR OR SPROCKET
AVENSIS REPAIR MANUAL (RM1018E)
LUBRICATION – OIL PUMP ASSY (1AZ–FSE)
(See page 14–222)
(See page
(See page
32. REMOVE OIL PAN SUB–ASSY
(a) Remove 12 bolts and 2 nuts.
A64641
(b) Insert the blade of SST between the crank case, timing
chain cover and oil pan, cut off applied sealer and remove
the oil pan.
SST 09032–00100
NOTICE:
Be careful not to damage the contact surface of timing
chain cover, crank case and oil pan.
A00019
(See page
(See page 14–139)
(See page 14–139)
42. REMOVE OIL PUMP ASSY
(a) Remove 3 bolts, the oil pump and gasket.
B11673
(See page 14–139)
http://vnx.su
14–139)
18–17)
14–139)
(See page 14–139)