Table of Contents
Advertisement
27–6
Example:
Camber
Toe
1Y00'
(1.0Y)
(Scale)
0
2
4
AVENSIS REPAIR MANUAL (RM1018E)
REAR SUSPENSION
(i)
6
G23890
http://vnx.su
–
REAR WHEEL ALIGNMENT
How to read an adjustment chart (using examples).
(1)
Measure the present alignment.
Example:
Camber (RH) : –1Y24' (–1.4Y)
Camber (LH) : –2Y24' (–2.4Y)
Toe–in (total) : IN 7.0 mm (0.276 in.)
(2)
Mark the difference between the standard value (A)
and the measured value (B) on the adjustment
chart.
Standard value:
Camber: –0Y54' (–0.9Y)
Toe–in (total) : IN 3.0 mm (0.12 in.)
Formula: A – B = C
Camber: (RH) : –0Y54' – (–1Y24') = 0Y30'
Camber: (LH) : –0Y54' – (–2Y24') = 1Y30'
Toe–in (total) : IN 3.0 – IN 7.0 = OUT 4.0
Toe–in (each side) : OUT 2.0
(3)
As shown in the example chart, read the distance
from the marked point to the center of the chart, and
adjust the upper and/or lower arm adjusting cams
accordingly.
Amount to turn camber adjusting cam assy (by gradu-
ation) :
Scale (RH) : – (Inward) 1.5
Scale (LH) : – (Inward) 5.5
Amount to turn tie rod adjusting tube (by graduation):
Angle (RH) : – (Shorter) 96Y
Angle (LH) : – (Shorter) 108Y
Advertisement
Table of Contents
