Toyota Avensis ZZT251 2003 Service And Repair Manual page 1271

51–22
Inscribed Mark
F41493
Compressed Air
F41491
AVENSIS REPAIR MANUAL (RM1018E)
POWER STEERING – VANE PUMP ASSY (1CD–FTV)
If it is more than the maximum, replace the vane pump plate
and/or vane pump rotor with the one having the same mark as
stamped on the cam ring.
Inscribed mark: 0, 1, 2, 3 or 4
HINT:
There are 5 different marks for vane pump plate.
Mark
0
D30362
1
2
3
4
17. INSPECT FLOW CONTROL VALVE ASSY
(a) Coat the flow control valve assy with power steering fluid
and check that it falls smoothly into the flow control valve
hole by its own weight.
If necessary, replace the vane pump assy.
D30363
(b) Check the flow control valve assy for leakage. Close one
of the holes and apply compressed air of 392 to 490 kPa
(4 to 5 kgf cm
and confirm that air does not come out from the end holes.
F41622
http://vnx.su
Part number
44345–021 10
44345–02120
44345–02130
44345–02140
44345–02150
2
, 57 to 71 psi) into the opposite side hole,
Length mm (in.)
12.001 to 12.003
(0.47247 to 0.47255)
11.999 to 12.000
(0.47240 to 0.47244)
11.997 to 11.998
(0.47232 to 0.47236)
11.995 to 11.996
(0.47224 to 0.47228)
11.993 to 11.994
(0.47216 to 0.47220)