14–258
54.
REMOVE NO.2 CAMSHAFT
55.
REMOVE CAMSHAFT
56.
REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSY
(a)
Remove the bolt and the oil control valve.
AVENSIS REPAIR MANUAL (RM1018E)
ENGINE MECHANICAL
–
53.
REMOVE EXHAUST MANIFOLD CONVERTER
SUB–ASSY
(a)
Remove the 2 bolts and 2 nuts, and then detach the No.
1 and No. 2 exhaust manifold stay.
(b)
Disconnect the 3 oxygen sensor connectors.
A77350
(c)
Remove the 5 nuts, the exhaust manifold and gasket.
A52497
(See page
14–240)
(See page
14–240)
57.
REMOVE CAMSHAFT BEARING NO.2
A32664
58.
SUPPORT ENGINE ASSEMBLY WITH TRANSAXLE
(a)
Install the oil pan sub–assy.
(b)
Set the jack under the engine assembly w/ transaxle, and
place a wooden block on the jack.
(c)
Remove the chain block and sling devise.
A56213
http://vnx.su
CYLINDER HEAD GASKET (1AZ–FSE)