Table of Contents
Advertisement
14–128
83.
REMOVE WATER INLET
(a)
Remove the 2 nuts and the water inlet.
84.
REMOVE THERMOSTAT
85.
REMOVE IGNITION COIL ASSY
(a)
Remove the 4 bolts and the 4 ignition coils.
87.
REMOVE DRIVE SHAFT BEARING BRACKET
(a)
Remove the 3 bolts and the drive shaft bearing bracket.
88.
REMOVE FUEL DELIVERY PIPE W/INJECTOR
89.
REMOVE WATER BY–PASS PIPE NO.1
(a)
Remove the bolt and 2 nuts, and then detach the water by–pass pipe No. 1.
Oil Pressure Switch
AVENSIS REPAIR MANUAL (RM1018E)
ENGINE MECHANICAL
–
PARTIAL ENGINE ASSY (1AZ–FE)
82.
REMOVE EXHAUST MANIFOLD CONVERTER
SUB–ASSY
(a)
Remove the 3 bolts and 2 nuts, and then detach the No.
1 and No. 2 exhaust manifold stays.
A60067
(b)
Remove the 5 nuts, and then remove the exhaust man-
ifold converter and gasket.
A52497
86.
REMOVE V–RIBBED BELT TENSIONER ASSY
(a)
Remove the bolt and nut, and then remove the V–ribbed
belt tensioner.
A32676
(See page
90.
REMOVE ENGINE OIL PRESSURE SWITCH ASSY
(a)
Using SST, remove the engine oil pressure switch.
SST
A78645
http://vnx.su
11–26)
09268–46021
Advertisement
Table of Contents
