Table of Contents
Advertisement
14–18
Yellow Color Mark
Timing Mark
56.
INSTALL CHAIN VIBRATION DAMPER NO.1
(a)
Install the chain vibration damper with the 2 bolts.
Torque: 9.0 N m (92 kgf cm, 80 in. lbf)
57.
INSTALL CHAIN TENSIONER SLIPPER
(a)
Install the chain tensioner slipper with the bolt.
Torque: 19 N m (194 kgf cm, 14 ft lbf)
SST
Seal Packing
1ZZ–FE,3ZZ–FE ENGINE REPAIR MANUAL
(RM923E)
ENGINE MECHANICAL
(d)
Install the timing chain on the camshaft timing sprockets
with the yellow color links aligned with the timing marks on
the camshaft timing sprockets.
A62173
58.
INSTALL CRANKSHAFT POSITION SENSOR PLATE
NO.1
(a)
Install the plate with the "F" mark facing forward.
A30867
59.
INSTALL TIMING GEAR COVER OIL SEAL
(a)
Apply MP grease to the oil seal lip.
(b)
Using SST, tap in a new oil seal until its surface is flush
with the timing chain cover edge.
SST
NOTICE:
Keep the lip off foreign materials.
A62174
60.
INSTALL TIMING CHAIN OR BELT COVER SUB–ASSY
Seal Width
4 – 5 mm
(a)
Remove any old packing material from the contact sur-
face.
A62175
http://vnx.su
–
PARTIAL ENGINE ASSY (1ZZ–FE/3ZZ–FE)
09223–22010
Advertisement
Table of Contents
