Table of Contents
Advertisement
14–92
SST
Disconnect
Hook
Pin
Plunger
Push
AVENSIS REPAIR MANUAL (RM1018E)
ENGINE MECHANICAL
62.
(a)
63.
A12816
64.
(a)
A11858
65.
(a)
(b)
A62837
(c)
Turn
A62180
(d)
HINT:
If the plunger does not be extended, press the slipper into the
chain tensioner using a screwdriver so that the hook is took off
from the knock pin and let the plunger can be extended.
Turn
A62181
http://vnx.su
–
CYLINDER HEAD GASKET (1ZZ–FE/3ZZ–FE)
INSTALL TRANSVERSE ENGINE ENGINE MOUNTING
BRACKET
Install the transverse engine engine mounting bracket
with the 3 bolts.
Torque: 47 N m (479 kgf cm, 35 ft lbf)
INSTALL WATER PUMP ASSY
INSTALL V–RIBBED BELT TENSIONER ASSY
Install the V–ribbed belt tensioner with the nut and bolt.
Torque:
29 N m (296 kgf cm, 21 ft lbf) for Nut
69 N m (704 kgf cm, 51 ft lbf) for Bolt
INSTALL CRANKSHAFT PULLEY
Align the keyway of the pulley with the key located on the
crankshaft and slide the pulley into place.
Using SST, install the crankshaft pulley bolt.
SST
09960–10010 (09962–01000, 09963–01000)
Torque: 138 N m (1,407 kgf cm, 102 ft lbf)
Turn the crankshaft counterclockwise and take the hook
off the knock pin to release the plunger.
Turn the crankshaft clockwise, and check that the plunger
is extended.
(See page
16–9)
Advertisement
Table of Contents
