Toyota Avensis ZZT251 2003 Service And Repair Manual page 1402

60–42
SUPPLEMENTAL RESTRAINT SYSTEM
Battery
SST(s)
10 m (33 ft) or more
AVENSIS REPAIR MANUAL (RM1018E)
(c) Install the SST(s).
(1)
SST
NOTICE:
To avoid damaging the SST(s) connector and wire harness,
do not lock the secondary lock of the twin lock.
SST(s)
H42758
(2)
(3)
NOTICE:
Take care not to damage the SST(s) wire harness.
(4)
(d) Deploy the airbag.
H41078
(1)
(2)
HINT:
The airbag is deploys as the LED of the SST(s) activation switch
comes on.
(e) Dispose of the curtain shield airbag assy LH.
CAUTION:
Y
The curtain shield airbag assy LH is extremely hot
when the airbag is deployed, so do not touch it for at
least 30 minutes after deployment.
Y
Use gloves and safety glasses when handling the cur-
tain shield airbag assy LH with the deployed airbag.
Y
When moving the vehicle for scrapping which has the
curtain shield airbag assy LH with the deployed air-
bag, use gloves and safety glasses.
Y
Do not apply water, etc. to the curtain shield airbag
assy LH with the deployed airbag.
Y
Always wash your hands with water after completing
the operation.
HINT:
When scrapping a vehicle, deploy the airbag and scrap the ve-
hicle with the curtain shield airbag assy LH being installed.
http://vnx.su
– CURTAIN SHIELD AIR BAG ASSY LH
Connect the connectors of the SST(s) to the curtain
shield airbag assy LH connector.
09082–00700, 09082–00802 (09082–10801,
09082–20801)
Move the SST(s) to at least 10 m (33 ft) away from
the rear of the vehicle.
Close all the doors and windows in the vehicle.
Connect the red clip of the SST(s) to the battery
positive (+) terminal and the black of the SST(s) clip
to the negative (–) terminal.
Check that no one is inside the vehicle or within a
10 m (33 ft) radius of the vehicle.
Press the activation switch of the SST(s) and
deploy the airbag.