Toyota Avensis ZZT251 2003 Service And Repair Manual page 668

14–298
SST
AVENSIS REPAIR MANUAL (RM1018E)
ENGINE MECHANICAL –
(b) Using SST, tighten the nut of the fuel inlet pipe to the com-
Fulcrum
mon rail side.
Length
SST
30 cm
Torque:
42 N m (428 kgf cm, 31 ft lbf) for a used pipe using SST
46 N m (469 kgf cm, 34 ft lbf) for a used pipe not using
SST
31 N m (316 kgf cm, 23 ft lbf) for a new pipe using SST
34 N m (347 kgf cm, 25 ft lbf) for a new pipe not using
A79149
SST
HINT:
Y
Use a torque wrench with a fulcrum length of 30 cm
(11.81 in.)
Y
Check if the used pipe has deflection or is installed prop-
erly after inlet pipe is reassembled. If there is deflection
or if it can not be installed properly, replace the used pipe
with a new pipe.
(c) Using SST, tighten the nut of the fuel inlet pipe to the
pump side.
SST
Torque:
42 N m (428 kgf cm, 31 ft lbf) for a used pipe using SST
46 N m (469 kgf cm, 34 ft lbf) for a used pipe not using
SST
31 N m (316 kgf cm, 23 ft lbf) for a new pipe using SST
34 N m (347 kgf cm, 25 ft lbf) for a new pipe not using
SST
HINT:
Y
Use a torque wrench with a fulcrum length of 30 cm
(11.81 in.)
Y
Check if the used pipe has deflection or is installed prop-
erly after inlet pipe is reassembled. If there is deflection
or if it can not be installed properly, replace the used pipe
with a new pipe.
131. INSTALL NOZZLE LEAKAGE PIPE NO.2
(a) Install a new gasket and the leakage pipe with the check
valve.
Torque:
21 N m (214 kgf cm, 15 ft lbf) for check valve
8.8 N m (90 kgf cm, 78 in. lbf) for bolt
A81587
http://vnx.su
PARTIAL ENGINE ASSY (1CD–FTV)
09023–12700
09023–12700