Toyota Avensis ZZT251 2003 Service And Repair Manual page 1205

RHD Steering Position Type:
LHD Steering Position Type:
MP Grease
24. INSTALL CLUTCH PEDAL SPRING
25. INSTALL COMBINATION METER ASSY (RHD STEERING POSITION TYPE)
26. INSTALL INSTRUMENT PANEL SUB–ASSY LOWER (LHD STEERING POSITION TYPE)
(See page 71–11)
27. INSPECT AND ADJUST CLUTCH PEDAL SUB–ASSY
AVENSIS REPAIR MANUAL (RM1018E)
CLUTCH – CLUTCH PEDAL SUB–ASSY (MTM)
23. INSTALL CLUTCH MASTER CYLINDER PUSH ROD
CLEVIS W/HOLE PIN
(a) Apply MP grease to the contact surface of the hole pin
and clevis bush.
(b) Connect the clevis to the clutch pedal with the hole pin.
HINT:
Y
RHD steering position type:
Install the hole pin from the right side of the vehicle.
Y
LHD steering position type:
Install the hole pin from the left side of the vehicle.
(c) Install the clip to the hole pin.
D30782
http://vnx.su
(See page
(See page 42–2)
42–11
71–21)