Table of Contents
Advertisement
SST
9.
REMOVE CHAIN TENSIONER ASSY NO.1
(a)
Remove the 2 nuts and chain tensioner.
NOTICE:
Be sure not to revolve the crank shaft without the chain tensioner.
12.
REMOVE CRANKSHAFT POSITION SENSOR PLATE NO.1
(a)
Remove the crankshaft position sensor plate from the crankshaft.
13.
REMOVE CHAIN TENSIONER SLIPPER
(a)
Remove the bolt and chain tensioner slipper.
14.
REMOVE CHAIN VIBRATION DAMPER NO.1
(a)
Remove the 2 bolts and chain vibration damper.
1ZZ–FE,3ZZ–FE ENGINE REPAIR MANUAL
(RM923E)
ENGINE MECHANICAL
–
PARTIAL ENGINE ASSY (1ZZ–FE/3ZZ–FE)
(b)
Using SST, remove the pulley bolt.
SST
(c)
Remove the crankshaft pulley from the crankshaft.
A62837
10.
REMOVE TIMING CHAIN OR BELT COVER
SUB–ASSY
(a)
Remove the 11 bolts and nuts.
(b)
Remove the timing chain cover by prying the portions be-
tween the cylinder head and cylinder block with a screw–
driver.
NOTICE:
Be careful not to damage the contact surfaces of the timing
A10076
chain cover, cylinder head and cylinder block.
11.
REMOVE TIMING GEAR COVER OIL SEAL
(a)
Using a screwdriver remove the oil seal.
A30848
http://vnx.su
09960–10010 (09962–01000, 09963–01000)
14–5
Advertisement
Table of Contents
