Toyota Avensis ZZT251 2003 Service And Repair Manual page 444

26. INSTALL TURBO WATER PIPE SUB–ASSY NO.1
(a) Install a new gasket and the turbo water pipe with the 2 nuts.
Torque: 13 N m (135 kgf cm, 9.7 ft lbf)
27. INSTALL TURBOCHARGER SUB–ASSY
(a) Install a new gasket and the turbocharger with the 3 nuts.
Torque: 53 N m (540 kgf cm, 39 ft lbf)
28. INSTALL TURBO OIL INLET PIPE SUB–ASSY
(a) Install a new gasket and the oil pipe with the 2 nuts.
Torque: 13 N m (135 kgf cm, 9.7 ft lbf)
A
B
AVENSIS REPAIR MANUAL (RM1018E)
INTAKE
25.
(a)
B13096
29.
(a)
B
(b)
(c)
A
(d)
A79165
30.
(a)
http://vnx.su
– TURBOCHARGER SUB–ASSY (1CD–FTV)
REMOVE TURBO WATER PIPE SUB–ASSY NO.1
Remove the 2 nuts, the turbo water pipe and the gasket.
INSTALL TURBOCHARGER STAY
Install the turbocharger stay, and temporarily tighten bolt
A.
Temporarily tighten nut B while pushing the cylinder head
toward the turbocharger stay.
Torque: 8.0 N m (82 kgf cm, 71 in. lbf)
Tighten bolt A.
Torque: 56 N m (571 kgf cm, 41 ft lbf)
Tighten nut B.
Torque: 56 N m (571 kgf cm, 41 ft lbf)
INSTALL EXHAUST MANIFOLD CONVERTER
SUB–ASSY
Install the manifold stay, and temporarily tighten the cylin-
der block side of the manifold stay.
13–15