16–8
(d)
Warm up the engine until the thermostat valve begins to open.
HINT:
Press the radiator inlet and outlet hose several times by hand during the warming up.
(e)
Stop the engine and wait until the coolant temperature gets cold. Then remove the radiator cap to
check the coolant level.
Y
If the level gets lower, perform the procedures from (a) through (e) again.
Y
If the level does not gets lower, fill the reservoir tank with engine coolant.
3.
CHECK FOR ENGINE COOLANT LEAKS
AVENSIS REPAIR MANUAL (RM1018E)
COOLING
–
ENGINE COOLANT (1ZZ–FE/3ZZ–FE)
(See page
16–1)
http://vnx.su