Toyota Avensis ZZT251 2003 Service And Repair Manual page 489

Timing Mark
4 1
Painted Link
Timing Mark
AVENSIS REPAIR MANUAL (RM1018E)
ENGINE MECHANICAL
(c)
(d)
(e)
18.
Painted Link
(a)
A62195
(b)
2 3
A62196
(c)
A62197
(d)
A32124
http://vnx.su
– CAMSHAFT (1ZZ–FE/3ZZ–FE)
Check that there is no clearance between the gear's
fringe and the camshaft.
Tighten the fringe bolt with the camshaft timing gear fixed.
Torque: 54 N m (551 kgf cm 40 ft lbf)
Check that the camshaft timing gear assembly can move
to the retard angle side (the right angle) and is locked at
the most retarded position.
INSTALL CAMSHAFT
Install the timing chain on the camshaft timing gear with
the painted links aligned with the timing marks on the
camshaft timing gear as shown in the illustration.
Examine the front marks and numbers and tighten the
bolts in the sequence shown in the illustration.
Torque: 13 N m (133 kgf cm, 10 ft lbf)
Put the camshaft No.2 on the cylinder head with the
painted links of the chain aligned with the timing mark on
the camshaft timing gear.
Tighten the camshaft timing gear set bolt temporarily.
14–71