Toyota Avensis ZZT251 2003 Service And Repair Manual page 1078

32–20
17. INSTALL FRONT WHEEL LH
Torque: 103 N m (1,050 kgf cm, 76 ft lbf)
18. INSTALL HEATER ASSY (W/ COLD AREA)
19. INSTALL BRAKE MASTER CYLINDER SUB–ASSY
(a) w/o VSC:
SST 09023–00100
(b) w/ VSC:
SST 09023–38400
20. INSTALL CHARCOAL CANISTER ASSY (GASOLINE ENGINE TYPE)
21. INSTALL FUEL FILTER ASSY (DIESEL ENGINE TYPE)
22. CONNECT ENGINE ROOM RELAY BLOCK
23. INSTALL AIR CLEANER ASSEMBLY WITH HOSE
24. FILL RESERVOIR WITH BRAKE FLUID
25. BLEED MASTER CYLINDER
(a) w/o VSC:
SST 09023–00100
(b) w/ VSC:
SST 09023–38400
26. BLEED BRAKE LINE
27. BLEED CLUTCH PIPE LINE (M/T TRANSAXLE)
28. CHECK AND ADJUST BRAKE PEDAL HEIGHT
29. CHECK PEDAL FREE PLAY
30. CHECK PEDAL RESERVE DISTANCE
31. CHECK FUEL LEAK
32. CHECK FLUID LEVEL IN RESERVOIR
33. CHECK BRAKE FLUID LEAKAGE
AVENSIS REPAIR MANUAL (RM1018E)
BRAKE
15. INSTALL BRAKE BOOSTER ASSY
(a) Install the brake booster assy with the 4 nuts.
Torque: 13 N m (130 kgf cm, 9 ft lbf)
(b) Install the clevis pin and clip to the brake master cylinder
clevis.
(c) Connect the vacuum hose to the brake booster assy.
F42620
16. CONNECT FRONT BRAKE TUBE NO.5
(a) Using SST and spanner, connect the brake tube to the
flexible hose.
SST
Torque: 15 N m (155 kgf cm, 11 ft lbf)
F40019
(See page
(See page
(See page 32–4)
(See page 32–4)
(See page 32–6)
(See page
(See page
http://vnx.su
– BRAKE BOOSTER ASSY (LHD)
09023–00100
55–100)
(See page 32–13)
(See page 11–82)
32–4)
(See page 42–13)
(See page 32–6)
32–6)
32–4)