Toyota Avensis ZZT251 2003 Service And Repair Manual page 472

14–320
33. REMOVE NOZZLE LEAKAGE PIPE ASSY
34. REMOVE INJECTOR ASSY
HINT:
Since each injector assembly has a characteristic fuel injecting behavior, store them in correct order so that
they can be returned to the original locations when re–assembling.
7
13
15
10
12
4
6
5
37. REMOVE NO.2 CAMSHAFT
(a) Remove the camshaft sub–assy and the camshaft carrier.
SST
AVENSIS REPAIR MANUAL (RM1018E)
ENGINE MECHANICAL
(See page
35.
(a)
(b)
A09668
36.
1 3
2
(a)
9
8
(b)
11
14
A09650
38.
(a)
A09619
39.
(a)
A09620
http://vnx.su
– CAMSHAFT (1CD–FTV)
(See page 11–60)
11–60)
REMOVE CAMSHAFT OIL SEAL RETAINER
Remove the 4 bolts.
Using a screwdriver, remove the oil seal retainer by prying
between the oil seal retainer and the camshaft bearing
cap.
REMOVE CAMSHAFT
Using several steps, loosen and remove the 15 bearing
cap bolts uniformly in the sequence shown in the illustra-
tion.
Remove the 5 bearing caps and the camshaft sub–assy.
REMOVE CAMSHAFT OIL SEAL
Using a screwdriver and a hammer, tap out the oil seal.
INSTALL CAMSHAFT OIL SEAL
Using SST and a hammer, tap in a new oil seal until its sur-
face is flush with the camshaft oil seal retainer edge.
SST 09223–46011