Table of Contents
Advertisement
20.
CONNECT FRONT SUSPENSION ARM SUB–ASSY LOWER NO.1 RH
HINT:
Connect the RH side by the same procedures as the LH side.
21.
INSTALL TIE ROD END SUB–ASSY LH
22.
INSTALL TIE ROD END SUB–ASSY RH
HINT:
Connect the RH side by the same procedures as the LH side.
24.
CONNECT FRONT STABILIZER LINK ASSY RH
HINT:
Install the RH side by the same procedures as the LH side.
25.
STABILIZE SUSPENSION
(a)
Install the front wheel and jack down the vehicle.
Torque: 103 N m (1,050 kgf cm, 76 ft lbf)
(b)
Bounce the vehicle up and down several times to stabilize the suspension.
AVENSIS REPAIR MANUAL (RM1018E)
FRONT SUSPENSION
–
FRONT SUSPENSION ARM SUB–ASSY LOWER NO.1
LH (ATM)
19.
CONNECT FRONT SUSPENSION ARM SUB–ASSY
LOWER NO.1 LH
(a)
Connect the lower suspension arm to the lower ball joint
with the 2 nuts and bolt.
Torque: 89 N m (908 kgf cm, 66 ft lbf)
C80293
(See page
23.
CONNECT FRONT STABILIZER LINK ASSY LH
(a)
Install the stabilizer bar link with the nut.
Torque: 74 N m (755 kgf cm, 55 ft lbf)
HINT:
If the ball joint turns together with the nut, use a hexagon (6 mm)
wrench to hold the stud.
F13686
26.
FULLY TIGHTEN FRONT SUSPENSION ARM
SUB–ASSY LOWER NO.1 LH
(a)
Fully tighten the 2 bolts and nut.
Torque: 137 N m (1,400 kgf cm, 101 ft lbf)
C80889
http://vnx.su
30–6)
26–19
Advertisement
Table of Contents
