Table of Contents
Advertisement
OVERHAUL
HINT:
COMPONENTS:
See page 55–91
1.
DISCHARGE REFRIGERANT FROM REFRIGERATION SYSTEM
SST
07110–58060 (07117–58080, 07117–58090, 07117–78050, 07117–88060, 07117–88070,
07117–88080)
2.
REMOVE FRONT BUMPER COVER
w/o Hot gas heater:
w/ Hot gas heater:
F-)--(
F-)--E
AVENSIS REPAIR MANUAL (RM1018E)
HEATER & AIR CONDITIONER
(See page
3.
DISCONNECT COOLER REFRIGERANT DISCHARGE
HOSE NO.1
(a)
Remove the bolt and disconnect the cooler refrigerant
discharge hose No.1 from the w/ receiver condenser
assy.
(b)
Remove the O–ring from the cooler refrigerant discharge
hose No.1.
NOTICE:
Seal the opening of the disconnected parts using vinyl tape
to prevent moisture and foreign matters from entering.
I35836
4.
DISCONNECT LIQUID TUBE SUB–ASSY A
(a)
w/o Hot gas heater:
Remove the bolt and disconnect the liquid tube sub–assy
A from the w/ receiver condenser assy.
(b)
w/o Hot gas heater:
Remove the O–ring from the liquid tube sub–assy A.
NOTICE:
Seal the opening of the disconnected parts using vinyl tape
to prevent moisture and foreign matters from entering.
I35335
(c)
w/ LHD Hot gas heater:
Disconnect the liquid tube sub–assy A assy from the liq-
uid tube sub–assy B.
(d)
w/ LHD Hot gas heater:
Remove the O–ring from the liquid tube sub–assy A.
NOTICE:
Seal the opening of the disconnected parts using vinyl tape
to prevent moisture and foreign matters from entering.
I35336
http://vnx.su
–
W/RECEIVER CONDENSER ASSY
(See page
76–3)
55–93
550ZB–01
55–38)
Advertisement
Table of Contents
