14–16
Disconnect
Hook
Pin
Plunger
Push
AVENSIS REPAIR MANUAL (RM1018E)
ENGINE MECHANICAL
Turn
A62180
HINT:
If the plunger does not be extended, press the slipper into the
chain tensioner using a screwdriver so that the hook is took off
from the knock pin and let the plunger can be extended.
Turn
A62181
16.
(a)
A11858
17.
(a)
A64005
http://vnx.su
–
VALVE CLEARANCE (1ZZ–FE/3ZZ–FE)
(3)
Turn the crankshaft counterclockwise, and take the
hook off the knock pin to release the plunger.
(4)
Turn the crankshaft clockwise, and check that the
plunger is extended.
INSTALL V–RIBBED BELT TENSIONER ASSY
Install the V–ribbed belt tensioner with the nut and bolt.
Torque:
29 N m (296 kgf cm, 21 ft lbf) for Nut
69 N m (704 kgf cm, 51 ft lbf) for Bolt
INSTALL
ENGINE
SUB–ASSY RH
Install the engine mounting insulator with the 4 bolts and
2 nuts.
Torque: 52 N m (530 kgf cm, 38 ft lbf)
MOUNTING
INSULATOR