Toyota Avensis ZZT251 2003 Service And Repair Manual page 913

6. CHECK OIL PRESSURE
Oil pressure:
At idle
At 4,500 rpm
7. REMOVE OIL PRESSURE GAUGE
Adhesive
9. START ENGINE AND CHECK FOR LEAKS
AVENSIS REPAIR MANUAL (RM1018E)
LUBRICATION – LUBRICATION SYSTEM (1CD–FTV)
245 to 588 kPa (2.5 to 6.0 kgf/cm
8. INSTALL OIL PRESSURE SWITCH ASSY
(a) Apply adhesive to 2 or 3 threads of the oil pressure switch.
Adhesive:
Part No. 08833 – 00080, THREE BOND 1344,
LOCTITE 242 or equivalent
(b) Using a deep socket wrench 24mm, install the oil pres-
sure switch.
Torque: 15 N m (153 kgf cm, 11 ft lbf)
NOTICE:
P13638
Do not start the engine within 1 hour after the installation.
(c) Connect the oil pressure switch connector.
http://vnx.su
2
29 kPa (0.3 kgf/cm , 4.3 psi) or more
2
, 36 to 85 psi) or more
17–21