Toyota Avensis ZZT251 2003 Service And Repair Manual page 573

14–338
76. INSTALL CAMSHAFT OIL SEAL RETAINER
77. INSTALL CAMSHAFT TIMING PULLEY
SST 09960–10010 (09962–01000, 09963–01000)
78. INSTALL CAMSHAFT POSITION SENSOR
79. INSTALL INJECTOR ASSY
80. INSTALL NOZZLE LEAKAGE PIPE ASSY
SST 09992–00242
82. INSTALL NOZZLE HOLDER SEAL
(a) Install 4 new nozzle holder seals.
83. INSTALL VACUUM PUMP ASSY
AVENSIS REPAIR MANUAL (RM1018E)
ENGINE MECHANICAL
(See page
(See page 11–60)
81.
:Seal Packing
(a)
(b)
(c)
(d)
A09663
(See page
84.
NOTICE:
When assembling the pipes, perform the operation with the
engine cold under room temperature.
(a)
(b)
http://vnx.su
– CYLINDER HEAD GASKET (1CD–FTV)
(See page 14–318)
14–318)
(See page 10–64)
(See page 11–60)
INSTALL CYLINDER HEAD COVER SUB–ASSY
Remove any old packing (FIPG) material.
Apply seal packing to the cylinder head.
Seal packing: Part No. 08826–00080 or equivalent
Install the gasket to the head cover.
Install the cylinder head cover with the 10 bolts.
Torque: 13 N m (135 kgf cm, 9.7 ft lbf)
14–318)
INSTALL INJECTION PIPE SUB–ASSY NO.1
(See page 11–60)
Remove the vinyl or the plastic bag from the injector and
vinyl tape from the common rail.
Temporarily install the injection pipe.